for temperature range from -35℃ to 150℃

※ Technical data (according to DIN 12876)

※ In case using silicon oil, you need to exchange other material tubes (inlet and out late part), such as a copper tube, and a Teflon tube instead of a silicon tube in the fitting.

1) Technical data according to DIN 12876. (bath fluid: ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical conditions.

Intelligent program control

• 10 programs are available for temperature ramp-up and dwell control.
• 10 steps per program and 99 hours 59 minutes per step.
• Stored programs are easily linkable.
• Programs can be repeated up to 99 cycles.
• Pre-heating and heating time are settable before the program starts.

Performance

• Temperature range.
  - RW3-35P models from -35°C to 150°C.
  - RW3-25P models from -25°C to 150°C.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning / Automatic run.
• Suitable for both internal and external bath environments due to reduced turbulence by using the five-speed adjustable pump and built-in cooling coil.
  (1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation)

Convenience

• (IoT) Internet of Things monitors via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (Option: LC Green Box)
• Intuitive touch screen LCD controller with easy icons and logical menus.
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Digital input and output control function for interlocking external devices.
• RS-232 / USB interface for external control and data collection. 
• Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
• Detachable condenser air filter for easy maintenance of refrigerating efficiency.
• Usage of CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
• Quick-release front grill for easy cleaning of the condenser.
• Built-in casters and side handle for easy transport and installation.

 RW3-P Series Video     IoT Video

Safety

• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
• The temperature warning Indicator simply shows the inner reservoir’s temperature in three different colors.
• Complete safety protection system with warning alarms.
  - Low fluid level and dry-running, over-temperature, over-current.
• The keypad lock function prevents accidental changes during operation.
• Splash-proof keypad.

for temperature range from -35℃ to 150℃

※ Technical data (according to DIN 12876)

※ In case using silicon oil, you need to exchange other material tubes (inlet and out late part), such as a copper tube, and a Teflon tube instead of a silicon tube in the fitting.

1) Technical data according to DIN 12876. (bath fluid: ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical conditions.

Intelligent program control

• 10 programs are available for temperature ramp-up and dwell control.
• 10 steps per program and 99 hours 59 minutes per step.
• Stored programs are easily linkable.
• Programs can be repeated up to 99 cycles.
• Pre-heating and heating time are settable before the program starts.

Performance

• Temperature range.
  - RW3-35P models from -35°C to 150°C.
  - RW3-25P models from -25°C to 150°C.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning / Automatic run.
• Suitable for both internal and external bath environments due to reduced turbulence by using the five-speed adjustable pump and built-in cooling coil.
  (1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation)

Convenience

• (IoT) Internet of Things monitors via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (Option: LC Green Box)
• Intuitive touch screen LCD controller with easy icons and logical menus.
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Digital input and output control function for interlocking external devices.
• RS-232 / USB interface for external control and data collection. 
• Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
• Detachable condenser air filter for easy maintenance of refrigerating efficiency.
• Usage of CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
• Quick-release front grill for easy cleaning of the condenser.
• Built-in casters and side handle for easy transport and installation.

 RW3-P Series Video     IoT Video

Safety

• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
• The temperature warning Indicator simply shows the inner reservoir’s temperature in three different colors.
• Complete safety protection system with warning alarms.
  - Low fluid level and dry-running, over-temperature, over-current.
• The keypad lock function prevents accidental changes during operation.
• Splash-proof keypad.

for temperature range from -35℃ to 150℃

※ Technical data (according to DIN 12876)

※ In case using silicon oil, you need to exchange other material tubes (inlet and out late part), such as a copper tube, and a Teflon tube instead of a silicon tube in the fitting.

1) Technical data according to DIN 12876. (bath fluid: ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical conditions.

Intelligent program control

• 10 programs are available for temperature ramp-up and dwell control.
• 10 steps per program and 99 hours 59 minutes per step.
• Stored programs are easily linkable.
• Programs can be repeated up to 99 cycles.
• Pre-heating and heating time are settable before the program starts.

Performance

• Temperature range.
  - RW3-35P models from -35°C to 150°C.
  - RW3-25P models from -25°C to 150°C.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning / Automatic run.
• Suitable for both internal and external bath environments due to reduced turbulence by using the five-speed adjustable pump and built-in cooling coil.
  (1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation)

Convenience

• (IoT) Internet of Things monitors via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (Option: LC Green Box)
• Intuitive touch screen LCD controller with easy icons and logical menus.
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Digital input and output control function for interlocking external devices.
• RS-232 / USB interface for external control and data collection. 
• Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
• Detachable condenser air filter for easy maintenance of refrigerating efficiency.
• Usage of CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
• Quick-release front grill for easy cleaning of the condenser.
• Built-in casters and side handle for easy transport and installation.

 RW3-P Series Video     IoT Video

Safety

• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
• The temperature warning Indicator simply shows the inner reservoir’s temperature in three different colors.
• Complete safety protection system with warning alarms.
  - Low fluid level and dry-running, over-temperature, over-current.
• The keypad lock function prevents accidental changes during operation.
• Splash-proof keypad.

for temperature range from -35℃ to 150℃

※ Technical data (according to DIN 12876)

※ In case using silicon oil, you need to exchange other material tubes (inlet and out late part), such as a copper tube, and a Teflon tube instead of a silicon tube in the fitting.

1) Technical data according to DIN 12876. (bath fluid: ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical conditions.

Intelligent program control

• 10 programs are available for temperature ramp-up and dwell control.
• 10 steps per program and 99 hours 59 minutes per step.
• Stored programs are easily linkable.
• Programs can be repeated up to 99 cycles.
• Pre-heating and heating time are settable before the program starts.

Performance

• Temperature range.
  - RW3-35P models from -35°C to 150°C.
  - RW3-25P models from -25°C to 150°C.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning / Automatic run.
• Suitable for both internal and external bath environments due to reduced turbulence by using the five-speed adjustable pump and built-in cooling coil.
  (1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation)

Convenience

• (IoT) Internet of Things monitors via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (Option: LC Green Box)
• Intuitive touch screen LCD controller with easy icons and logical menus.
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Digital input and output control function for interlocking external devices.
• RS-232 / USB interface for external control and data collection. 
• Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
• Detachable condenser air filter for easy maintenance of refrigerating efficiency.
• Usage of CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
• Quick-release front grill for easy cleaning of the condenser.
• Built-in casters and side handle for easy transport and installation.

 RW3-P Series Video     IoT Video

Safety

• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
• The temperature warning Indicator simply shows the inner reservoir’s temperature in three different colors.
• Complete safety protection system with warning alarms.
  - Low fluid level and dry-running, over-temperature, over-current.
• The keypad lock function prevents accidental changes during operation.
• Splash-proof keypad.