DP0150 Benchmark Pulse 150 UltraSonic Honogenizer w/ 6mm Titanium Probe, Motorized Stand, Remote Controller & Sound Proof Enclosure, 115v  

Benchmark Pulse 650 UltraSonic Homogenizer w/ 6mm Horn, Motorized Stand, Remote Controller and Sound Proof Enclosure, 115v

Founded 1936

MSS150-CX4-1 SONIPREP 150 PLUS Ultrasonic Disintegrator w/ Continuous Flow

Ultrasonic Disintegration

The Soniprep 150 Plus transmits sound energy to the medium through high-frequency vibration at the tip of an interchangeable probe. The effect of this is to create many series of micro-cavities in the dispersion medium. The rapid alternation of positive and negative pressure produced by the sound waves traveling through the liquid causes these minute gas-filled bubbles to disintegrate implosively during the rarefaction phase of the sound pressure wave. This produces intense local shock waves in which the pressure may reach several thousand atmospheres and rapid microstreaming of the liquid around the point of collapse. The intense localized sheer gradients so generated combined, in part, with the transient regions of high pressure, resulting in the disruptive capabilities of this instrument.

Varied Applications

The Soniprep 150 Plus can be used for a wide variety of applications but is mainly used for the disintegration, disruption, and homogenization of cells, tissues, spores, and bacteria. Our powerful ultrasonic disintegrator is highly regarded throughout the world and its uses can encompass the preparation of emulsions, the stimulation of bacterial activity, the dispersion of solids in liquids, and the promotion of chemical reactions.

• Cell disruption
• Nanoparticle dispersion
• Homogenization and sample preparation
• DNA shearing/ChiP
• Sonochemistry
• Soil extraction
• etc.

Features

• New digital display
• Control and monitor amplitude for reproducible results
• Sound-insulated self-contained unit
• Range of 3 titanium probes to suit most applications
• High-frequency 23KHZ generator with a piezoelectric transducer
• 99-minute timer with override facility
• Optional process timer unit available
• Optional wattage meter available
• Ideally suited for volumes of 2ml to 100ml plus a continuous flow
• The piezoelectric transducer produces vibrations from electrical input to a level of 93% efficiency. This compares well with magnetostrictive versions which are only 45% efficient.

Safety Features

The Soniprep 150 Plus comes with a sound-reducing cabinet as standard to help to minimize disturbance near the unit. The frequency of operation has been specially selected to operate at levels higher than those normally audible to the human ear to help maintain minimum noise levels. The clear door of the Soniprep 150 Plus allows the operator to observe the sample whilst sonication is taking place thus allowance can be made for aerosol production or spillages.

Choice of Probes (Optional)

The choice of 3 probes covers the needs of most applications. The "exponential probe" can be used for particularly small volumes from 2ml to 10ml and the larger probes can be used for increased volumes of up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

Amplitude Meter (Optional)

An amplitude meter is positioned at the front of the Soniprep 150 Plus to monitor the probe amplitude. It is calibrated in microns and gives the actual peak-to-peak movement that is taking place by using the relevant multiplication factor for the desired probe. This gives a more accurate reflection of what the probe is doing, unlike some sonicators which merely give a reading of the power input into the probe. This does not necessarily reflect the optimum power transfer to the sample.

Process Timer (Optional)

The Soniprep 150 Plus comes with a 99-minute timer and an override switch. This allows the operator the opportunity to perform continuous or timed sonication for up to 99 minutes. The override switch is particularly useful to the user who wishes to use the continuous flow facility for through-flow sonication. The continuous flow feed and exit lines can be accessed by the continuous flow vessel via the apertures present at the rear of the unit. In addition to the 99-minute timer that is available on the Soniprep 150 Plus, there is a process timer available. This allows the operator the flexibility to accurately time sonication for reproducible results. It also allows the operator the facility to pulse sonication to help build up over a period of time. Pulse times can vary from 1 to 99 seconds and can be controlled in minutes or cycles.

"Click here"

Founded 1936

MSS150-CX4-5 SONIPREP 150 PLUS Ultrasonic Disintegrator w/ Continuous Flow

Ultrasonic Disintegration

The Soniprep 150 Plus transmits sound energy to the medium through high-frequency vibration at the tip of an interchangeable probe. The effect of this is to create many series of micro-cavities in the dispersion medium. The rapid alternation of positive and negative pressure produced by the sound waves traveling through the liquid causes these minute gas-filled bubbles to disintegrate implosively during the rarefaction phase of the sound pressure wave. This produces intense local shock waves in which the pressure may reach several thousand atmospheres and rapid microstreaming of the liquid around the point of collapse. The intense localized sheer gradients so generated combined, in part, with the transient regions of high pressure, resulting in the disruptive capabilities of this instrument.

Varied Applications

The Soniprep 150 Plus can be used for a wide variety of applications but is mainly used for the disintegration, disruption, and homogenization of cells, tissues, spores, and bacteria. Our powerful ultrasonic disintegrator is highly regarded throughout the world and its uses can encompass the preparation of emulsions, the stimulation of bacterial activity, the dispersion of solids in liquids, and the promotion of chemical reactions.

• Cell disruption
• Nanoparticle dispersion
• Homogenization and sample preparation
• DNA shearing/ChiP
• Sonochemistry
• Soil extraction
• etc.

Features

• New digital display
• Control and monitor amplitude for reproducible results
• Sound-insulated self-contained unit
• Range of 3 titanium probes to suit most applications
• High-frequency 23KHZ generator with a piezoelectric transducer
• 99-minute timer with override facility
• Optional process timer unit available
• Optional wattage meter available
• Ideally suited for volumes of 2ml to 100ml plus a continuous flow
• The piezoelectric transducer produces vibrations from electrical input to a level of 93% efficiency. This compares well with magnetostrictive versions which are only 45% efficient.

Safety Features

The Soniprep 150 Plus comes with a sound-reducing cabinet as standard to help to minimize disturbance near the unit. The frequency of operation has been specially selected to operate at levels higher than those normally audible to the human ear to help maintain minimum noise levels. The clear door of the Soniprep 150 Plus allows the operator to observe the sample whilst sonication is taking place thus allowance can be made for aerosol production or spillages.

Choice of Probes (Optional)

The choice of 3 probes covers the needs of most applications. The "exponential probe" can be used for particularly small volumes from 2ml to 10ml and the larger probes can be used for increased volumes of up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

Amplitude Meter (Optional)

An amplitude meter is positioned at the front of the Soniprep 150 Plus to monitor the probe amplitude. It is calibrated in microns and gives the actual peak-to-peak movement that is taking place by using the relevant multiplication factor for the desired probe. This gives a more accurate reflection of what the probe is doing, unlike some sonicators which merely give a reading of the power input into the probe. This does not necessarily reflect the optimum power transfer to the sample.

Process Timer (Optional)

The Soniprep 150 Plus comes with a 99-minute timer and an override switch. This allows the operator the opportunity to perform continuous or timed sonication for up to 99 minutes. The override switch is particularly useful to the user who wishes to use the continuous flow facility for through-flow sonication. The continuous flow feed and exit lines can be accessed by the continuous flow vessel via the apertures present at the rear of the unit. In addition to the 99-minute timer that is available on the Soniprep 150 Plus, there is a process timer available. This allows the operator the flexibility to accurately time sonication for reproducible results. It also allows the operator the facility to pulse sonication to help build up over a period of time. Pulse times can vary from 1 to 99 seconds and can be controlled in minutes or cycles.

"Click here"

Ultrasonic Disintegration

The Soniprep 150 Plus transmits sound energy to the medium through high-frequency vibration at the tip of an interchangeable probe. The effect of this is to create many series of micro-cavities in the dispersion medium. The rapid alternation of positive and negative pressure produced by the sound waves traveling through the liquid causes these minute gas-filled bubbles to disintegrate implosively during the rarefaction phase of the sound pressure wave. This produces intense local shock waves in which the pressure may reach several thousand atmospheres and rapid microstreaming of the liquid around the point of collapse. The intense localized sheer gradients so generated combined, in part, with the transient regions of high pressure, resulting in the disruptive capabilities of this instrument.

Varied Applications

The Soniprep 150 Plus can be used for a wide variety of applications but is mainly used for the disintegration, disruption, and homogenization of cells, tissues, spores, and bacteria. Our powerful ultrasonic disintegrator is highly regarded throughout the world and its uses can encompass the preparation of emulsions, the stimulation of bacterial activity, the dispersion of solids in liquids, and the promotion of chemical reactions.

• Cell disruption
• Nanoparticle dispersion
• Homogenization and sample preparation
• DNA shearing/ChiP
• Sonochemistry
• Soil extraction
• etc.

Features

• New digital display
• Control and monitor amplitude for reproducible results
• Sound-insulated self-contained unit
• Range of 3 titanium probes to suit most applications
• High-frequency 23KHZ generator with a piezoelectric transducer
• 99-minute timer with override facility
• Optional process timer unit available
• Optional wattage meter available
• Ideally suited for volumes of 2ml to 100ml plus a continuous flow
• The piezoelectric transducer produces vibrations from electrical input to a level of 93% efficiency. This compares well with magnetostrictive versions which are only 45% efficient.

Safety Features

The Soniprep 150 Plus comes with a sound-reducing cabinet as standard to help to minimize disturbance near the unit. The frequency of operation has been specially selected to operate at levels higher than those normally audible to the human ear to help maintain minimum noise levels. The clear door of the Soniprep 150 Plus allows the operator to observe the sample whilst sonication is taking place thus allowance can be made for aerosol production or spillages.

Choice of Probes (Optional)

The choice of 3 probes covers the needs of most applications. The "exponential probe" can be used for particularly small volumes from 2ml to 10ml and the larger probes can be used for increased volumes of up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

Amplitude Meter (Optional)

An amplitude meter is positioned at the front of the Soniprep 150 Plus to monitor the probe amplitude. It is calibrated in microns and gives the actual peak-to-peak movement that is taking place by using the relevant multiplication factor for the desired probe. This gives a more accurate reflection of what the probe is doing, unlike some sonicators which merely give a reading of the power input into the probe. This does not necessarily reflect the optimum power transfer to the sample.

Process Timer (Optional)

The Soniprep 150 Plus comes with a 99-minute timer and an override switch. This allows the operator the opportunity to perform continuous or timed sonication for up to 99 minutes. The override switch is particularly useful to the user who wishes to use the continuous flow facility for through-flow sonication. The continuous flow feed and exit lines can be accessed by the continuous flow vessel via the apertures present at the rear of the unit. In addition to the 99-minute timer that is available on the Soniprep 150 Plus, there is a process timer available. This allows the operator the flexibility to accurately time sonication for reproducible results. It also allows the operator the facility to pulse sonication to help build up over a period of time. Pulse times can vary from 1 to 99 seconds and can be controlled in minutes or cycles.

"Click here"

Founded 1936

 46222-5019 MSE External Process Timer Unit for the Soniprep 150 Series Ultrasonic Disintegrator, each

Process Timer:

The Soniprep 150 Plus comes with a 99-minute timer and an override switch. This allows the operator the opportunity to perform continuous or timed sonication for up to 99 minutes. The override switch is particularly useful to the user who wishes to use the continuous flow facility for through-flow sonication. The continuous flow feed and exit lines can be accessed by the continuous flow vessel via the apertures present at the rear of the unit.

In addition to the 99-minute timer that is available on the Soniprep 150 Plus, there is a process timer available. This allows the operator the flexibility to accurately time sonication for reproducible results. It also allows the operator the facility to pulse sonication to help build up over a period of time. Pulse times can vary from 1 to 99 seconds and can be controlled in minutes or cycles.

Process Timer (46222-5019) & Watt Meter (46222-5020)

The Soniprep 150 Plus has become an indispensable item for decades in laboratory ultrasonics by offering a unique blend of facilities. It has gained an enviable reputation, along with other MSE products, for giving long-term service combined with excellent long-term reliability. These factors combined make the Soniprep 150 Plus the obvious choice when it comes to laboratory ultrasonic applications.

Founded 1936

 46222-5020 MSE External Wattage Meter for the Soniprep 150 Series Ultrasonic Disintegrator, each

Watt Meter:

Plug into any Soniprep Series 150 series for metering the output power (wattage) of the probe in use. The EXTERNAL WATTAGE METER displays the absolute power OUTPUT of the probe used.

Amplitude Meter:

The Amplitude Meter is positioned at the front of the Soniprep 150 Plus control panel to monitor the probe amplitude. It is calibrated in microns and gives the actual peak-to-peak movement that is taking place by using the relevant multiplication factor for the desired probe. This gives a more accurate reflection of what the probe is doing, unlike some sonicators which merely give a reading of the power input into the probe. This does not necessarily reflect the optimum power transfer to the sample.

Process Timer (46222-5019) & Watt Meter (46222-5020)

Founded 1936

38121-114A 3mm (Micro Tip) Exponential Titanium Probe used in both the Soniprep 150 & the NEW Soniprep 150 Plus disintegrators.

Choice of Probes: The choice of 3 probes covers the needs of most applications. The "Exponential probe" can be used for particularly small volumes down to 2ml and up to 10ml. The larger probes can be used for increased volumes up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

The above probes fit the following disintegrator.

Founded 1936

38121-1154 9.5mm Solid Titanium Probe used in both the Soniprep 150 and the NEW Soniprep 150 Plus disintegrators.

Choice of Probes: The choice of 3 probes covers the needs of most applications. The "Exponential probe" can be used for particularly small volumes down to 2ml and up to 10ml. The larger probes can be used for increased volumes up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

The above probes fit the following disintegrator.

38121-1169 19mm Solid Titanium Probe used in both the Soniprep 150 & the NEW Soniprep 150 Plus disintegrators.

Choice of Probes: The choice of 3 probes covers the needs of most applications. The "Exponential probe" can be used for particularly small volumes down to 2ml and up to 10ml. The larger probes can be used for increased volumes up to 100ml or continuous flow applications. A range of tubes and vessels are also available to accommodate samples for the various applications that may be needed. Rubber sealing caps are available if the tubes need to be sealed during the disruption process.

The above probes fit the following disintegrator.

Founded 1936

48533-1016 Continuous Flow Vessel or Cooled Treatment Vessel for use in the Soniprep 150 Series Ultrasonic Disintegrator, each