855-ACB "Anaerobic" Glove Box (2 stations) w/ Transfer Chamber includes 2 Pumps
"Anaerobic Chamber"
855-Series
The 855-AC (Anaerobic Chamber) has been designed for manually controlling your atmosphere when working with Oxygen sensitive materials. It is perfect for working in situations requiring low levels of Oxygen during critical isolation of the operator or your research materials. Any inert gas may be used.
Its main advantage is minimizing the risk of Oxygen entry into the main working chamber. If trace amounts of Oxygen happen to enter the main chamber, the Catalyst Heater reduces it to water vapor. The drying train can then be activated to remove any excess water vapor.
The 855-AC is offered as a complete system ready to use. There are no other components required. All you need to add are your work samples and your gas of choice.
This glove box has a capacity of 348 culture plates when using our suspended shelf accessory. Please refer to the Accessories Section (800-SHELF-1).
The Basic Chemical Reaction.
The internal atmosphere is drawn off the floor of the glove box and is pushed up through the heating elements and the warm Palladium (Pd) pellets. The Hydrogen in the special gas mixture then reacts with trace amounts of Oxygen to create water vapor. The excess water vapor is then absorbed by the Molecular Sieve™ in the three drying train canisters. The canisters are rechargeable.
Common anaerobic chamber applications:
Chemistry
Stem Cell Research
Microbiology
Clostridium difficile
Cancer Cell Research
Anaerobic Research
Life Science
Clinical
Standard Features of the "Anaerobic Chamber":
Standard 24-month warranty (do not include gloves or consumables.)
No installation. Comes ready to use.
Over 50 years of anaerobic chamber manufacturing.
A completely sealed design requires lower gas consumption and lower operating costs.
Formed one-piece clear plastic top section with “Easy Clean” corners.
Matched Die-Molded white thermoset bottom with “EasyClean” corners.
Two vacuum diaphragm pumps, one each for the drying train and the transfer chamber (purging).
The drying train includes three (3) clear plastic canisters filled with Molecular Sieve.
All controls are illuminated.
“Bright Light” system (40,000-hour lamp guarantee).
White ambidextrous Hypalon gloves.
All clamps are adjustable to compensate for wear.
Adjustable vacuum gauge on transfer chamber.
Four (4) ground key-cock valves for purging.
The transfer chamber is 12” (305mm) long x 11” (280mm) I.D.
Electrical outlet (socket) strip (UL, CSA, & CE).
Self-sealing quick disconnects allow changing of the drying train without disturbing the internal atmosphere.
Specs & Ordering Information
Model
855-AC
855-ACB
Inside Dimensions (WxDxH)
41" x 28" x 26" / 1067 x 711 x 660mm
60" x 38" x 31" / 1524 x 965 x 787mm
Outside Dimensions (includes Transfer Chamber) WxDxH
This new Hypoxia Chamber Glove Box is ideal for tissue culture work, including tumor cell and stem cell research. It features a color-operated “touch screen” for automatically controlling oxygen levels, temperature levels, and carbon dioxide levels.
The 856-Series is ideal for stem cell and cancer cell research!
Standard Features of the Hypoxia Chamber:
8” Color Panel Touch Screen.
O2 sensor and CO2 sensor.
Platinum RTD with sealing gland.
N2, CO2, and O2 gas hook-up.
Inert gas hook-up.
Ethernet port connection for data logging.
Thermoelectric Assembly (Peltier device).
Password-protected, configurable PID control.
One touch, on-screen data-logging.
Air circulation fan.
Specs & Ordering Information
Model
856-HYPO
Inside Dimensions (WxDxH)
41" x 28" x 26" / 1067 x 711 x 660mm
Outside Dimensions (includes Transfer Chamber) WxDxH
857-OTA Automatic Anaerobic Glove Box "One Touch" w/ Transfer Chamber
Automatic Anaerobic Chamber
857-Series
“One-Touch / Go Anaerobic” Glove Box This new Automatic “One Touch” Anaerobic Chamber allows one to simply press the “Go Anaerobic” button to automatically create a strict anaerobic atmosphere. It features a color-operated “touch screen” for automatically creating an anaerobic atmosphere.
No installation.
No additional accessories are required.
Less than 300 Liters of gas are required to achieve a strict anaerobic atmosphere.
Standard Features of the Automatic Anaerobic Chamber:
One-Touch, “Go Anaerobic” button to initiate the purging sequence.
One-Touch, on-screen data-logging with USB port for long-term studies.
Larger touch-screen, display. 24-hour data logging.
Automatic pressure hold function. Pressure control maintains user-selected pressure levels.
Automatic purging cycles for the main chamber and transfer chamber.
Larger, easy-to-use operator touch screen.
Continual display of atmospheric oxygen conditions in percentage (%) and parts-per-million (ppm)
The oxygen display automatically switches to ppm when O2 levels are < 0.5%
User-selectable gas; Nitrogen or Anaerobic gas mixture.
High and low-level alarms with alarm history log.
Password-protected Administration window.
Optional Rh monitoring and control.
Specs & Ordering Information
Model
856-OTA
Inside Dimensions (WxDxH)
41" x 28" x 26" / 1067 x 711 x 660mm
Outside Dimensions (includes Transfer Chamber) WxDxH
55" x 35" x 38" / 1397 x 889 x 665mm
Transfer Chamber (Lx I.D.)
12" x 11" / 305 x 280mm
Latex glove Opening ( Ø )
7" / 175mm
Volume
17.3 cu.ft. / 489L
Number of gloves
2
Oxygen sensor accuracy (%)
0-100.0% / Accuracy ±1.0%
Oxygen sensor accuracy (ppm)
0-10,000 / Accuracy ±1.0ppm FS
Temperature range
ambient to 41.0°c / Accuracy: ±0.5°c
Pressure range
-3" WC to +3" WC / (-1500 Pa to +1500 Pa)
Gas consumption
300 liters
Electrical (Hospital Grade) UL, CSA, CE
115v 50-60 Hz / 230v 50-60 Hz (Export)
Weight
450 lbs / 204 kg
Warranty
2 years
What's Included:
Programmable Catalyst Heater units (800-HEATER) and palladium canisters (800-PC) have two main functions; To reduce trace amounts of oxygen and maintain the correct incubation temperature level for cultivating anaerobes. The temperature range is ambient to 42.0° C.
The Palladium Canister can be rejuvenated by heating it in a hot oven for three (3) hours at 450°F, (232°C).
Two (2) Palladium Canisters are included.
Easy-to-use "Touch Screen" controls with
oxygen analyzer, pressure hold function,
password protection, and chamber
selection.
The Drying Train System and Pump are factory mounted and include three (3) canisters filled with molecular sieve. The drying train
system is designed to reduce moisture and trace amounts of oxygen inside the glove box.
The #870-CLC “Closed Loop” Isolator is a completely automated negative pressure containment glove box.
The system is engineered and programmed to maintain a slight negative working pressure to ensure the containment of your specimens (-0.5” of H2O). The internal atmosphere is continually filtered by two (2) HEPA filters. Filters are rated at 99.9997% efficiency and can be changed over from within the isolator for safety. During the changeover, contaminated filters do not come into direct contact with the operator.
These isolators may be coupled together in trains for multiple station work processes. They can be set up for up to four (4) sets of glove ports (operators). Two operators on both the front and back walls.
Stainless steel support cart with locking casters INCLUDED!
Standard Features of the Closed-Loop Containment Isolator:
Effective containment of potentially hazardous toxins, organisms, and other materials etc.
A completely sealed containment unit with automatic negative pressure control.
Large, easy-to-read control panel with digital controllers and bright LED status lights.
• Easy (and safe) to change, inlet, and outlet HEPA filters. Filters can be incinerated after use.
Easy to clean highly radiused corners.
Stainless steel support cart (trolley) with gas tank support tracks for safety.
Clear plastic top and bottom section. The bottom is formed of high-impact resistant plastic.
“Bright Light” illumination system with a 40,000-hour lamp guarantee.
Two (2) pairs of white ambidextrous Hypalon™ gloves.
Manual house exhaust valve for emergency venting of the isolator.
Electrical outlet (socket) strip (UL, CSA, & CE).
Four (4) ground key cock valves for purging.
Standard twenty-four (24) month warranty. (Not gloves or consumables).
Specs & Ordering Information
Model
870-CLC
Inside Dimensions (WxDxH)
57" x 35" x 27" / 1423 x 890 x 690mm
Outside Dimensions (includes Transfer Chamber) WxDxH
890-THC Temperature & Humidity Controlled Glove Box
Temperature and Humidity Controlled Glove Box
890-Series
The NEW #890-THC accurately maintains temperature and humidity (Rh) inside a roomy single-operator glove box. We also offer multiple operator units.
The unit is operated by merely touching the color control screen for the functions desired. It includes your private password-protected administrator controls. Touch screen viewing of the data logging function is included as well as a serial port connection for data logging.
Automatic purging cycles can be programmed. The humidity range control accuracy is ± 2% Rh. Temperature can be regulated in either “F” or “C” degrees and the Peltier style thermoelectric assembly is accurate to ± 2 degrees C. The temperature range is from 16 to 44 degrees C.
Standard Features of the Temperature and Humidity-Controlled Glove Box:
• The top section is one piece of clear acrylic plastic for easy viewing.
• 4 key cock valves for purging. 2 in the main chamber & 2 in the transfer chamber.
• 8” (203 mm) Color panel touch screen. Date and time display.
• Humidity (Rh) transmitter with 8 feet of sensor cable.
• Serial port for external computer data logging & remote access.
• “Bright Light” system (40,000-hour lamp guarantee).
Specs & Ordering Information
Model
890-THC & 890-THC/DT
Inside Dimensions (WxDxH)
41" x 28" x 26" / 1067 x 711 x 660mm
Outside Dimensions (includes Transfer Chamber) WxDxH
55" x 35" x 38" / 1397 x 889 x 665mm
Transfer Chamber (Lx I.D.)
12" x 11" / 305 x 280mm
Latex glove Opening ( Ø )
7" / 175mm
Volume
17.3 cu.ft. / 489L
Number of gloves
2
Temperature range
ambient to 16°C to 44°C / Accuracy: ±2°C
Humidity Control (Rh)
±2%
Electrical (Hospital Grade) UL, CSA, CE
115v 50-60 Hz / 230v 50-60 Hz (Export)
Weight
450 lbs / 204 kg
Warranty (excludes gloves and consumables)
2 years
890-THC/DT with Optional Drying Train System
The drying train accessories include 2 canisters filled with Molecular Sieve™ and a circulation vacuum pump. This accessory can be used if a house supply of inert gas is not available. Periodic regeneration of the Molecular Sieve™ is recommended for optimal drying performance.
Note: If the drying train is preferred, use Pn# 890-THC-DT (Domestic) or 890-THC-DT/EXP (Export).
