Lab Companion™ TH-DG-150 Temp & Humidity (Dual) Test Chamber 300L (-5 to 100c), 230v

TH-DG-150 Temperature & Humidity (Dual) Test Chamber 150L x 2, Temp range: -5 to 100c, 230v 50-60hz.

Environmental test chambers with dual chambers, designed for conducting each different experiment at once. 

Stability test in accordance with ICH guidelines Q1A (R2).

1) The set value is set under the conditions of 40°C, 75%RH, technical data according to DIN 12880, IEC 60068. ※ All specifications are under ambient temperature 20℃ (68℉), No load. ※ Permissible environmental conditions are 18 - 30°C (recommended 20°C), 85%RH or less, under 2000m above sea level. ※ The DI water condition is pH 6.2 - 7.2 and the electrical conductivity is less than 20㎲/cm. FDA-registered company.  

Performance

• Microprocessor PID control / Temperature calibration / Automatic tuning.
• Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
• Water recycling systems reduce water consumption for longer operations.
• Air-tight door closure with perfect sealed packing.
  • Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
  • Two-point door latch also enhances the tightness of the door closure.
• Energy efficiency is achieved by optimization of the insulation system.
  • Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.

Convenience

• Three different volume sizes are available to suit any user's needs.
• Corrosion resistance stainless steel chamber and electric polished humidification tank.
• Water supply during operation is also available for long-term test purposes.
• The direct water system provides users great convenience when performing long-term tests (option).
• Clear observation of samples.
  • Tempered glass door with built-in heating wire.
  • Energy efficient, long life span LED lighting.
  • Wider view, an inner glass door is available for monitoring of samples (option).
• Cable port for introduction of external probes or wires.
  • A 50mm diameter cable port comes standard on the left side of the unit.
  • Additional 50mm or 80mm diameter cable ports, custom ordered (option).
• Casters for easy mobility during installation or relocation.
• User-friendly LCD controller.
  • Colorful interactive touch-type LCD controller.
  • The set point temperature and present temperature are clearly shown together on display.
  • Sufficient programmable control support.
  • Operating progress can be shown in graph mode for better data understanding.
  • Automatic start/stop can be programmed for unattended operations.
  • The display indicates abnormal temperature changes or power failures.
  • Selective bilingual language support.
    (Korean / English or English / Chinese, selectable only when placing an order)
  • Temperature and other operating parameters can be recorded using a six-channel digital recorder (option).

Computer interface

• RS-485 communication port enables connection up to maximum of 32 units. Simultaneous monitoring and operating of multiple units is an available feature (option).
• Program patterns are simple to set with the use of our software.
• Easy to check the status of real-time operations. Graph data supports easy understanding.
• Storage and documentation of programs.
• Data with saving capabilities in excel and text format.
• Storage of program information, backup of value settings, recovery, and temperature values.
• RS-232 communication port as a standard offer.

* It is possible to set 100 segments per pattern, but the maximum number of segments is not 10,000 (100 patterns x 100 segments) but 6,000.

Safety

• Built-in door lock with a key.
• Automatic shut off after overheating alarm.
• Low and empty water level alarm.
• Power supply leakage breaker.
• Over current protection.
• Open door alarm.