Lab Companion™ LBV-100 Test Chamber 1000L (Amb +45 to 250c), 380v

Performance

• Suitable for a specific use, such as heat treatment and drying process.
• Microprocessor PID control / Temperature calibration / Automatic tuning.
• Air-tight door closure with double-sealed packing.
  - Heat-resistant silicone double packing completely blocks high heat leakage from the inner chamber (for LBV).
  - Non-conducting ceramic and heat-resistant silicone packing completely blocks high heat leakage from the inner chamber (for LTV).
  - The two-point door latch also enhances the tightness of the door closure.
• Energy efficiency is achieved through optimization of the insulation system.
  - If the unit is operating at max. The unit's surface does not allow temperatures above 51℃ (DIN EN 563).
• Reliable design and production of the door are guaranteed.
  - Evaluates the results after opening the door by 90 degrees and applying a 50kg load at a distance of 30cm from the hinges.

Convenience

• Corrosion-resistant stainless steel inner chamber.
• Space-efficient and easy-loading chamber design.
  - Included two wire shelves for loading large amounts of samples.
  - Heavy load perforated shelving, rated for 40kg also available (option).
• User-friendly LCD controller.
  - Colorful interactive touch-type LCD controller.
  - Set point temperature and present temperature are clearly shown together on the display.
  - Sufficient programmable control support.
  - Operating progress can be shown in graph mode for better data understanding.
  - Automatic start/stop can be programmed for unattended operations.
  - Display indicates abnormal temperature changes or power failures.
  - Selective bilingual language support.
  (Korean / English or English / Chinese, selectable only when placing an order).
  - Temperature and other operating parameters can be recorded using a six-channel digital recorder (option)
• Computer interface.
  - RS-485 communication port enables connection up to a maximum of 32 units. Simultaneous monitoring and operating of multiple units is an available feature (option).
  - Program patterns are simple to set with the use of our software.
  - Easy to check the status of real-time operations. Graph data supports easy understanding.
  - Storage and documentation of programs.
  - Data with saving capabilities in Excel and text format.
  - Storage of program information, backup of value settings, recovery, and temperature values.
  - RS-232 communication port as a standard offer.

Safety

• User-selectable operation mode after power interruption
  - Automatic run or Manual run.
• Over-temperature protection.
• Overcurrent and current-leakage protection (ELCB, earth-leakage circuit breaker).
• Independent safety fuse.
  - Important parts such as the controller and heaters are highly secured from short circuits. Each heater has an individual fuse to completely break a short circuit.
• Reversed-phase protection.
  - Electrical connection error indicator helps the user to rapidly fix the connection.
• Over-current protection of the motor.
  - Automatic shut-off in situations where there is an overcurrent to the motor.
• Open door warning.
  - The heater and fan stop when the door is in the open state.
• Electric wiring panel access warning.
  - Automatic stop if the cover of the electric wiring panel is opened.
• Built-in door lock with a key.